Fusor® 800EZ Factory Match Urethane Sealer/Adhesive

Fusor® 800EZ Factory Match Urethane Sealer/Adhesive
LORD Fusor® 800EZ factory match urethane sealer/adhesive duplicates a factory appearance on standing seams, cosmetic seams, truck bed seams, tooled door skin seams, floor pan seams, core support seams, brushed seams and other applications in which a non-sag cosmetic seam sealer is required.

Substrates

Can be used over epoxy and urethane primers.

OEM Approvals

• Ford: Meets body sealing spec; Recommended in body sealing TSBs • GM: Meets body sealing spec; Recommended in body sealing TSBs • Nissan: Meets body sealing spec; Recommended in corrosion repair TSBs

Features and Benefits

• Fusor 800EZ = 10.3 oz (305 ml) - Neutral cartridge • • No shrinkage, no cracking • New and improved non-sag formula - will hold brush strokes for the OEM look • Available in neutral (cartridges), white (cartridge) and black (cartridges) • Tools easily with water

Applications

Duplicates factory look on standing seams, cosmetic seams, truck bed seams, tooled door skin seams, floor pan seams, core support seams and brushed seams and any other application in which a non-sag cosmetic seam sealer is required.

Uncured Typical Properties*

Work Time, @ 70°F (21°C) 30 min.

Handling Strength, @ 70°F (21°C) 3-4 hr.

Cured Typical Properties*

Part Paintability, @ 70°F (21°C) 10 min. (Paint within 24 hours or scuff before painting)

Disclaimer *Data is typical and not to be used for specification purposes.